It's all about the Software

Having finally got round to finding where it is located I have to say this is a real game changer for checking for DX in the FM band. It took just over 3 minutes to load 5 hours worth of files at 1 line/sec resolution which can then be rapidly...

I have made band plans with overlapping plans. When plans overlap across the full width of the panadapter, The band text for the plans are on top of each other.

It would be valuable to move the texts in this situation to avoid text overlap....

Hi Simon,
after our messages on twitter, here I am to better describe converter definition needed for the C-band LNBs.
Currently UP or DOWN converters definitions are working subtracting or adding the local oscillator value (OFFSET) from the...

Hello,

Please, is it possible to add this Genesis G11 transceiver to the list of supported radios ?
I know it is old one, but I build it myself, and I am very pleased with its receiver.

Thank you very much,

Best regards,

Dragan, YU1UO

Hi,

Using Console with a Icom R8600.
Work really well together, but it takes, for me, a little getting used to the locked
radio screen.

Is there any present way of accessing the scanning functions that the radio has while
being controlled by...

Hi

This is a nice feature but one wonders why it is not available to an active receiver rather than to random highest
signal(s).

It seems that one might appreciate adding of an enabling setting tor the current Active Receiver (even Active...

The ability to read at least a couple command line parameters might be nice.

The first is /i (or -i or --identity). It's parameter would be the identity name.
for example: /i HF SWL RX888 MKII

The second is /a , -a, or --autorun. A parameter...

Simon,

Would it be possible to add the solar information that you display in your World Map to Console? Either just above/below the Frequency & Span display or make it interchangeable with the Statistics display.

Thanks!

--
Mike

Hi Simon

I would like to ask, if there is a possibility to send only spectrum data and audio from the server to the client.
With larger RF bandwidth (e.g. 8 MHz from a SDR-Play device), the bandwidth of the I/Q data becomes way too large for WAN...

Hi Simon,
I try to make a request that was talked about some time ago, hoping to be able to describe it better and that you can have time to consider it.
Some converters have the OL frequency higher than the IF frequency and therefore it is not...

Please add support for multiple CW Skimmer instances.

432.133.23 should be 432.133.230
432.148.1 should be 432.148.100
...
...
432 should be 432.000.000

73, Max

QRG.PNG

I often turn the audio off during a qso on QO-100.

- Is it possible to enlarge the speaker symbol making it easier to hit with the mouse?
- I sometime use the space bar and m to mute and unmute, Is it possible to enable the space bar to also...

Hi,

Would it be possible to have a UDP listener or TCP to track N1MM or HRD.

This would free up com ports or com port splitters that are unable to work together.

73
Pat
OO7P

OK here is my scenario. I tune up at low power. Accidentally leave Tune power slider at Max. Turn on linear. Make some contacts on that frequency. Totally forget Tune slider is left at full.

Next time come to tune on a different frequency but...

Hi Simon,
I downloaded and installed the latest 3.1 Beta and noticed that the forward and backward seek buttons on playback are no longer down on the window. Is it possible to return them down there next to the time grid? I know they are up top and...

Hi Simon,

I only recently discovered this feature and actually find it very useful because I don't have to launch any additional software. However, the modulation is a bit low. Unfortunately I couldn't find any setting for it.

Also, it's a little...

At the present time SDR Console cannot read the frequency information in an I/Q file recorded on a Kiwi SDR. It defaults to a 10 MHz C/F
Also, the Datafile Editor in SDRConsole is unable to handle these files

Rod

Hi everyone, it is possible to have the BiasTee function on Afedri Lan Iq receiver. Thanks

Can you please add a hold function for the maximum level?

The actual maximum level function is nice, but if the maximum level could hold for ever is better to find signals during a long time scan.
For that it would also be nice, if the speed can...

Hi,

In Servers, a graphic/world map showing the Servers that are available, and their locations ?

If so, then might it be possible to incorporate in the map where by merely clicking
on a e.g., a green pin (showing that that particular Server is...

Is there a way to use the Icom RC-28 VFO knob on Sdr console?

If not, is it possible to implement this in a future update?

Terry

(this message first ended up where?)

I find that the beacon is currently outside my Geostationary Satellite Beacon
window frequency range (possibly due LNB error due to cold weather?) and I'm
thus unable to lock on to it.

a. Is it possible to...

Hello,

What is the problem to add simultaneously decoding RDS on all frequencies from bandwidth? I guess hardware is already ready for this (in my case Elad FDM-S3 + Core i9-9900).

Thanks for the great software!

Simon, do you use this speedx improved algorithm based on ephraim-malah?