It's all about the Software

Greetings, I have configured omnirig and xiegu g90 with sdrplay and jtdx, when I transmit with jtdx sdrconsole does not detect tx, but if I press the ptt on the microphone it detects it and mutes the sound, the only way I got it to work is by...

I wanted to post that if anyone needs help or wants to discuss using the Elad FDM-DUO with Elad SW2 software using computer supplied microphone input, no latency problems and fantastic TX audio contact me. I am enjoying using my Elad as it was...

I am using the SDR console with an Adalm Pluto, can I also insert the Doppler correction in the Adalm Pluto TX circuit in satellite mode, unfortunately I have not found it, probably only possible with an external transceiver or a second Pluto via an...

Hi All. Could simple hamlib server support be added? In this way SDRConsole would appear as a hamlib server to handle setting/getting the frequency and mode.

You would start a TCP server and repond to only four command, sent in plain ASCII:
F XXX =...

Hello.
This is the second time I ask for this feature. There were no answers to the first one so I am going to insist,
Probably nobody is interested in signal analysis, but Antonio and me do like it.

When using the crop option of the data file...

Hoping someone can help. I've been using Simon's World Map for a while and never had an issue setting up satellites. Earlier in the week I noticed that the ISS tracking had fallen behind and refreshed the GPData. From that point on, I have no...

Hi all.
You know what it's like. You look at all the specs, read all the reviews you can find, check out all the software, and if you're like me, you end up more confused than when you started. I know that the Elad is about 3 times the price of the...

Greetings,
I haven't seen any new products from RFSpace for some time. Are they out of business?

Hi there,
I'm wondering if there's any way I can run Simon's World Map (fullscreen mode) as my desktop background? I tried Wallpaper Engine and it didn't play nicely. I also tried SmartContextMenu which was able to send it to back and enable...

Using SDR Console version v3.3 build 3195.
Context:
Using favourites with multiple receivers where each receiver has a different audio device.
All these audio devices are VAC's and feed different decoders.

When I add a new receiver, select its...

I'd like to see memory channels, when chosen, to be highlighted just like the frequencies in the receive pane. The receive pane frequencies have a light blue appearance when active.

Does anyone know of a plugin that works for automatic freq control. on a dish setup with c band LNB ADSC data. I get alot of drift with the sun peaking in and out of the clouds. it would be nice to have a AFC to follow the drift of the freq..

Could someone confirm the latest Pluto Plus Firmware version for me please. I believe from the BATC and Github it is v 0.33, but just wanted to check.
I am currently on v0.31-dirty and it has a few bugs on it.

Thanks for your assitance
Bob G4MWR

how about a freq drift tracking software for inmarsat c band and L band data. i have looked at the geostationary beacon software. seems if it was modified for all freqs it could work?..possible a automatic frequency correction.

Is there a way to add other speeds into the drop down list of speeds, or is there a tweek to a config file I need to use 1200bd on the serial port as my controller needs that speed?

I have two SDR-RTL v4 USB sticks and using SDR Console I see they are both same serial numbers RTLSDRBlog::Blog V4::00000001-1 I want to run both at same time so would I change that last number on one. To change serial number do I change last number...

I think I'm missing proper settings in SDRC when transmitting and/or when using in conjunction with JS8Call.

Is there any particular setting I need to look for when TXing in HF or digital modes?

I use External Radio and the panadapter reacts...

I have 3 ADALM Pluto sdr's all set up using IP addresses. It does not matter which one I select, it only uses the first one in the list.

Is there any way to get the full 20Mhz bandwidth on receive using a Pluto

Thanks Dave G4IUG Ex G8EAO

I don't recall setting Console this way, but what is the setting that causes SDR Console to open when the computer boots up? Not sure if that setting is in Windows or SDRC.

Hello,

I am trying to perform an analysis of the LNB's LO drift (prior to its modification) using any usable Oscar 100 NB beacon signal.
To do that I want to grab a 192 bandwidth and route it through virtual audio cable to the Spectrum Lab for...

Hi, this is rtlsdrblog, I manufacture the RTL-SDR Blog V3 and V4.

The V4 requires that the EEPROM have the manufacturer string be set to RTLSDRBlog and the product string be set to Blog V4 for the librtlsdr drivers to differentiate between the...

Hello,

I am using SDR Console to receive NB signals from Es-Hail 2.
To compensate for the LNB LO drift I use geostationary beacon feature.
Unfortunately spectrum plot of the plugin is freezed to the frequency range which does not always allow me to...

I am trying to run SDR Console connected to Pluto on a remote machine. I am sending the audio from my local machine to the remote machine with Remote Desktop Connection. When I transmit, I get a lot of noise on the transmit audio in Console.

I am...

Recently updated Console. Use WXtoIMg to display the NOAA Polar Orbiters. Now the display appears to be of an incorrect audio sampling frequency. Used SDR Play 1A, thought perhaps the problem arose after updating to UNO 1.4. But, replaced SDR Play...