It's all about the Software

I chase NDBs and there are many in the NDB community who prefer the 8 pole analog filters to the digital filters in SDRC. I looked into this and I believe that the reason is related to the shape of the response. The analog filter commonly used has a...

Hi Simon

I would like to ask if it's possible to allow imports of .csv files into the favourites, as well as exports to .csv, similar to the markers. I'd like to add several hundred aero and maritime frequencies I have in a spreadsheet but it's...

For radios where the driver and/or SDR-Radio Console performs the FFT, is it possible to average samples to arrive at a better sensitivity and SNR?

Hi,

Might it be possible, or even good idea, some time in the future to add
a simple slider to the screen to vary the audio emphasis between Bass and Treble ?

I know about the Equalizer already implemented, but an ever-present simple
slider would...

Hi Simon,
please consider adding two buttons, + and - , near the drive command slider, to be able to precisely increase and decrease the power output.
To prevent possible damage, using the slider.
TNX

73 Rocco IK8XLD

HI!

I would really appreciate to have the frequency centered when I switch from one receiver to another in place to find it in random position on the waterfall.
I know that changing zoom will center and click also center button too.

All my best...

Dear simon, hoping these links are novel and useful to you.

I am using my ADALM-Pluto TCVR with the HYDRA 3cm TRX module (see DUBUS 3/2020) which is in fact > a frequency DOUBLER (using XX1002 = Macom frequency doubler) of the ADALM PLUTO TX e.g. 5,184,100 MHz = 10.368,200 MHz
I have a problem to read the...

Hello,
I would be very happy to be able to define and send macros to the ELAD FDM-DUO tranciever. In the same way as ELAD's own software SW2 does.
I use the macros for setting up the DUO for HF or VHF use, normal or contest CW/SSB or WSJT, split...

Hi,

I've been using SDR-Radio with three different transverters, each transverter has a different up-converter off-set.
It would be good to have memories for different transverters, that would prevent the operator to type in the frequencies every...

Hello,

Not sure if I requested this before; don't remember.
If I did, I apologize,

Not important, but perhaps something to consider.

I'm always playing around with the RF Gain Settings.
It would, I think, be a lot easier if it was implemented as...

Hi Simon,

The V3 support many Wide Range SDR's.
What the Console V3 lacks is a scan-function.

Thank you.

Regards
Fernando

Hi Simon,

In the one-time recording setup dialog there is the wonderful Range option for choosing a smaller bandwidth to record, instead of the full receiver bandwidth, and I use this feature all the time. Can it also be included in the Scheduler...

Hi Simon,

Please add the support for Elad S3 Downconverter.

Thank you.

Regards
Fernando

20211026_151438225_iOS.jpg
20211026_155242651_iOS.jpg

Hi,

Having an editable (titles, colors, transparency...) band plan 'll be very nice feature.
here are some ideas.
Personnaly, my prefered is the last one.

BP1.png
BP2.png
BP3.png
BP4.png
BP5.png

Hi,

Great software! Already donated $25 for this very useful software - actually turned away from AIRSPY to use this one. Thanks!

Has anyone suggested to have the ability to simulate Close Call? For example if you are monitoring the UHF CB band...

I am a BCB DXer using an Airspy HF+ Discovery. Most of the time I record the baseband (a little under 1 mHz wide) and look for interesting finds later. I've been using SDR-Consile nearly a year.

I just realized what a tool Analyser could be. I used...

Hi,

let's assume you are using the following configuration:

==max 5w==> ==max 50w==> ====>

My tuner will propably die if I would tune it with 50W so I set the drive slider to a low value. In order to prevent accidently alteration of this value...

Hello,

please make it possible to trigger a few of the voice keyer recordings via the MIDI controller.

Thank you very much
odie

Hi,

first of all my situation: On my station PC, I am running SDR Console, a software for controlling a remote antenna switch and a self-written tool that motivates a remotly installed ATU to find a new tuning solution the next time it will see RF....

Hi

Congratulations, SDR Console is amazing.
I use it for long time on QO-100.
I tried several other SDR programs and SDR Console is by far the best one.

I would like to request a feature. And a sub-feature.

I have 2 SDR receivers connected to the...

Hi Simon,
I think this may have been requested before. Is there any chance to be able to produce a waterfall of a complete IQ recording? I use Data Analyser to check my recordings but that can take a long time to analyse several hours worth. I know...

Simon,

Currently the info box (while hovering) displays beam headings from the home station to the cursor position on the map. I am wondering can you add beam headings (selectable) from the cursor position TO the home station. This is very useful...

I've been playing with the RX88 MK II I now have. As it stands the main window zoom feature is useless. It always expands around 16 MHz. (Where's 128 ksps or better user settable sample rate?) I can fool it by setting the nonexistent LO frequency to...

Dear Simon,
I would appreciate ON/OFF options for Dither and Random, as they are available for RX-888 (Receive > DSP > Radio).
SDR Console is my favourite SDR UI; thank you very much for your great work and effort!
Walter HB9AJG