It's all about the Software

This morning, Simon's World Map presented me with the attached error message Error.png

All other maps listed on the Select drop down box appear to load just fine when selected. It's just the LargeWorldMapNE3 that will post off this error. My first...

Dear Friends

I set my Lime SDR as shown in the photo to have an IF at 150 MHz.
In transmission it works perfectly from 14 MHz it transmits at 164 Mhz,
while in reception at 164 MHz I receive nothing.

Where am I going wrong?

Thanks 73 Arnaldo...

With regard to the Frequency Database feature, it would be nice, due to my aforementioned laziness, that it might somehow highlight broadcasts that should be on now based on the current time so as to not have to sift through a sometimes long list....

SDR console is my favorite program for controlling SDRs, the latest addition is a ZynqSDR/LibreSDR which comes in a CNC housing. This SDR it is equivalent to the PlutoSDR, in fact the Pluto+ with 2TX and 2RX but it requires modified firmware. What...

Subject: Assistance with Ingesting Raw IQ Data from SDR Console across LAN into Python on another PC

Hi, I’m attempting to ingest raw IQ data output from either the Data Repeater or the SDR Server in SDR Console using Python. I can successfully...

Hi all,
I have a RTL-SDR V4 and trying to use it with SDR Console V3 on a Win 11 laptop.
I've spent time familiarizing myself with the software and now trying to listen to incoming signals.

The problem is that the sound is terrible. It sounds like...

Hi Guys,

I'm a long time radio builder, and I'm planning a hybrid analog/digital RTX.

I am testing RF output with a spettrum analyzer using SDR Consolle with LIME MINI USB on the HF band TX (setting 3 MHZ Hf-TX)

In some bands, even if they are...

The spectrum of a spyserver shows op with a peak carrier on any entered receive frequency and a valley around it.
On certain higher frequencies the whole display starts bouncing up and down.

When using the SDR# client all is fine.

You can try with...

Hi,
I just installed P2 on my ANAN 200D and tried it with SDRC without luck.
Everything looks OK except the audio which is terribly distorted. Also.
signals look more like AM ? (Thetis works fine...)

What have I missed??

73 de LA6gh
Nils

I would like to transfer the matrix setup I have configured on one computer to another computer also running SDR-Console. The matrix is pretty tedious to set up, but I can always call up the configuration on each computer and manually transfer the...

Hello! the first audio is with SDR# , 2 meter band, ham qso, NMF 12 khz...the second is with SDR console without noise reduction, NFM 12 knz...device RTL SDR v3, gain set to 38 for both, same time, same antenna, same PC...where am I going wrong?

hi, regarding NFM listening both of communications in general and communications in amateur radio bands (e.g. in the 2 meter band) what configurations do you use as filter width and above all as noise reduction? I am using for the 2 meter band a...

Is it possible for SDRC to control (send band data) an external BPF like the OM-Poer OM6BPF ?

Hi. I had installed the 3.4Beta version of the console on my own computer and my intention was to use it as a PAN adapter together with a Yaesu FTdx5000 radio. My SDR receiver is a FunCube pro+. The signal is controlled from the IF connector of the...

Hello. I'm still a beginner with SDR programs. I would have asked if I could use the Yaesu FTdx5000 radio as a PAN adapter with SDR Console 3.4. I would be grateful if someone could give advice on how to do it. My configuration is FTDx 5000...

I am using version 1.4.3 of World Map and notice that there is no longer Great Circle in the map projection on the Home page or context menu.
Has this been relocated and I'm just missing its new location or removed altogether as an option.
Thanks.

SDR Console v3.3 still needs MS Visual C++ 2010 and 2013 Redistributable kits.

MS Visual C++ 2010 and 2013 Redistributable kits are end-of-life products (EoL):

Only the MS Visual C++ Redistributable for Visual Studio 2015-2022 is supported by...

Hello,

I have been using thetis quite a while and have it all dialed in with my HL2 and XPA125B. Band switching works great on thetis. Wanted to try sdr console. Seems pretty nice except I can't get it to change the band on the amp. The pin...

Hello,

I have been running thetis with HL2, fully loaded, for a while now. It works great, band switching the XPA-125B and all, but I want to try SDR Console. I have a couple SDR dongles I want to add to this setup to make a sweet SDR rig. But...

Hello,

I have a question about the general operation of how I/Q data is dumped for third-party software as specified in this section of the documentation:

I would need if someone uses this option please clarify a few questions I have:

From...

Hi,

I have been using sdr console for years now, but I think it would be great if it could support transmit for DG8SAQ/PE0FKO/SoftRock based radios (currently there’s receive support).

This will enable owners of peaberry pi, multus proficio and...

I have long used and enjoyed the SDR Console, and believe it's one of the most featureful and capable out there.

It's just a pitty that I cannot transmit with my homemade and kit-made SDR radios based on hard/soft rock which use sound card input as...

Anyone install and use this software on a Win tablet? Just ordered one with a i5 processor with 8 GB of ram. Am using a LAN IQ. Works good on my regular pc but like sitting in my recliner dialing through the frequencies. Am hoping I didn’t wast $400...

Hello:

Question: can I assume that the SDR Console won't recognize the hardware mute found on the 9 pin connector? My hunch is that you need to use the Elad SW2 software to access this hardware mute feature. Am I correct?

Thanks
Scott N1IA

Greetings
For several years now, I have had solid performance and enjoying SDR Radio point and click capability with the Kenwood TS-990S / Airspy HF+ Discovery and the External Radio capability (thru OmniRig, of course). This is thru the LAN and...