It's all about the Software

Hi,

Simple questions, I know, but if anyone could clarify the
following for me, would be appreciative.
Just can't seem to find the right procedure for doing.

Regarding coloring the Spectrum, and the Waterfall:

I went to Tools/Options/Palettes...

Is it possible to adjust bandwidth from a receiver pane? I'm able to expand and contract it but it snaps back to original when the mouse button is released.

How to direct tune when a receiver is selected from the receiver pane without disturbing...

In the usb relay configuration section there are devices with VID=0519 and PID=2018.
I got an relayboard with these IDs, but it is not recognized by SDRC.
The relay is recognized under W7 ok.
Any Hints?

I just got a new PC and had to download and install the software. I still have my old PC. Where are the settings like my favorites for frequencies, etc. stored? I still have my old PC that I can recover them from. Thanks!

I Have the mute function set for strong signals, however I do not believe it is working correctly or there is an operator error. I have the RSP1A and a Yaesu FT1000MP with the pandadpter board installed. When I transmit I get the huge signal and...

Hi,

Always something new:

Have noticed that when I am on a am station, and the AM button is depressed, if I move
to another frequency it seems to automatically go to SAM .

Why ? Is there perhaps a Default I have set inadvertently somewhere ?...

Apologies if this has been asked before.

Using my HackRF One via Console 3.1 build 2320 just fine :D
Tried adding a RTL-SDR V.3, having first loaded the new driver with Zadig 2.6, but can’t start it because of this error:

API version don’t match...

Hello,

This really isn't important.
It's just asking for someone to educate me a bit,
and my desire to learn a bit more on File structures, etc.

I have been using the latest version, 3.1 with
CSVUserList Browser talking to it.
They really work...

Hello All,
i hope in an help.
I am using SDR Console v. 3.1 Build 2320,
I have made some settings in it and now whe i try to go on TX it seems it won't to go.
I have tried with bot Tune and Tone but i do not see my signal on the waterfall.
Yes the...

Hello,

Running vers. 3.1 build 2320 which I assume is the very latest. True ?

I am just getting started again, so may have this wrong.
I seem to remember reading recently that Console now can show the various bands (limits) graphically superposed...

Hello,
I'm using SDRConsole with Airspy Mini, conected to IF of my Yaesu FT-2000 transceiver as external receiver using OmniRig. Everything is working fine, except Waterfall and frequency bar are moving into oposite direction as I manually tune my...

I am trying to locate Omnirig 1.19. Every site I go to has 1.12 or v2. Does anyone have a site from where to get v 1.19? Thanks!

I had to make a forum account just to tell you that your software doesn't work... at all.

I have no idea what my frequency is, even though I can change it. I can't decimate. There's no way to change from LSB (which is apparently the default?) to...

My RF-Space SDR-IQ does not seem to like SDR Console or vice-versa! I'm posting to see if anyone has any ideas. The radio works just fine with the manufacturer's SpectraVue software, yet it will not play under SDR Console.

Here is the radio...

I'd like SDR Console to track my FT450 that I use for 6m digital work
Sdr Console reads an RTL whereby the signal from the yagi has gone thru an LNA.

Trouble comes when the FT450 is run by FLRig, which is not selectable as an external radio....

I have made an Arduino Micro-based midi controller for my HL2 running v. 3.0.24 SDR-C. It works very well; however, I don't seem to be able to get the pot to ever set to the AF Gain to 0 . At it's minimum, the pot will only set the AF Gain down to 1...

Hello everyone, I am trying to resolve what to my is a mystery. Have a new RTL2838UHIDIR and the audio from SDR console V3, the latest one that I took yesterday, is always distorted. Whether I use SSB or Broadcast FM (yes I do know the difference),...

Hello,

For anyone with a G-31 using on Console:

Would be very interested to hear any comments re the pros and cons
comparisons between a WinRadio G31 Excalibur, and:

SdrPlay RSPdx (other than freq. range)

Airspy HF+ Discovery

Which of the three...

Want to find out the best way to unscrew myself.

I saw the obscure core isolation virtualization, memory integrity security feature in Windows, thought I'd try it out. Got warnings of incompatible drivers, found several copies of msi2500.sys in...

Hi,

Was wondering:

Is there any clever way when looking at the Spectrum View at a particular waveform (in my case, often corrupted with noise, etc.)
to determine if it is USB, LSB, or am ?

Bob

Just a question out of curiosity. What is the programming language of SDR console?

Anyone any idea?

How can i change the dbm steps in Spectrum?
At the moment there are only 5db steps, i wwould like to change to 10db

Over the last few days I have added a Diamond Discone Antenna which was initially performing well with Console when in my basement. Now the discone is mounted on the roof. But gradually, sensitivity seems to be very much deteriorated. One station in...

I know I did this before but for the life of me, I cannot remember how I did it. I am trying to HIDE the above controls which appear whenever one moves the mouse across the Panadapter window.

There was a setting somewhere which allowed me to...

Hi,

Am I correct that upon closing the program, and re-opening it, the positions, and geometry of the various windows, etc. should come exactly back ?
Any caveats ?

Or, is there something that has to be done (first) to enable this ?

Thanks,
Bob