It's all about the Software

Welcome, dear Simon!! Please help me with the problem of displaying 10ghz on my console... The converter settings are made and displayed in the window, see the screenshot, but there is no display of the fundamental frequency... what should I do or...

Hello.
I try to run my Pluto over a VPN, but this VPN is a bit slow, so there is no continious sound out of the Console. Is it possible to reduce the bandwidth/samplingrate or what else, to get a smaller datasize?

I hope for any help.

'73...

Hello,
i want to use the 2nd RX input / TX output simultaneously with sdr-console for a dualband station.
How can i manage this?

Thanks in advance.
Greetings
Ralf DF6VW

i have a problem on the sound on my sdr console its clipping and sounds gargles and breaking up very fast break ups

Greetings from Athens!
I have decided to use my ADALM PLUTO with SDR CONSOLE version 3.1 in my Windows 10 Home 21H1 - 19043.1706. Yet every time I try to add Pluto as a definition via search, SDR CONSOLE crashes and shutdowns completely. Apart from...

Hello Simon,

I am using SDRC together with a Pluto Version B. The firmware version on the Pluto is the one of F5OEO edition Perseverance.
I am also working with DATV via OBS - there I use UDP.
This is the line from the Logfile that is appearing in...

hi,

I have DIGITUS gigabit/USB3.0 adapter but I can not connect Pluto via USB to ETH... USB connection with Pluto works ok.
I try like on this video :

Pluto is visible by IP on local LAN ok.

Any idea ?

tnx info...

Hello All,

I'm trying to install my Pluto with SDR console V3 onto my new PC.

When I start up the SDRconsole, the prog go to Radio Definitions, my pluto is plugged in my pc with USB, but when I do a search the pluto is not found.

When I add the...

Hello All,

I'm trying to install my Pluto with SDR console V3 onto my new PC.

When I start up the SDRconsole, the prog go to Radio Definitions, my pluto is plugged in my pc with USB, but when I do a search the pluto is not found.

When I add the...

Hi

I have used SDR console and a pluto revD for QO-100 RX which have worked perfekt with a BullsEye and locked to the mid beacon. I now plan to use the pluto for TX also so I connected a leo bodnar GPDSO set to 40 MHz to the external clock input...

hi,

Is there someone, who has Pluto, SDR C.3.1xx & Kuhne MKU LNC 10 QO-100 downconverter together ?

Question is, whats the RX and TX freq for Kuhne MKU LNC 10 QO-100 downconverter are ? Picture attached ...
dc.png

Thanks for help :)

Simon

I use PLUTO with SDR Console V3.0.38 as a PAN adapter for my 2 meter contests. There is always a DC in ther middle of the screen and also mirror signals are not suprest as I would expect.
for my Funcube dongle I have a special tool , where I can...

Dear Simon, I am glad to welcome you!! Please help me. It is not possible to configure the console to display the 10GHz frequency for normal QO-100 reception, with the normal display on the DSP panel. Settings to display as 99.9 made, settings in...

Hi,
I have a Pluto running with SDR console v3, ASUS pc and win 10, trying to get a QO 100 station together.I have the RX working ok, but I cannot get any TX. The console TX DSP panel all seems to operate as it should, but no output from the Pluto...

See this link .

For the time being don't use FW 0.32, stay with FW 0.31.

My notebook (ASUS X64) runs with Win10 and the latest update, as does my Lenovo PC.
My Pluto is connected to the PC and the notebook via LAN.
Everything works fine with the PC, but with the notebook I can only receive QO-100 signals.
With TXon +...

Can anyone tell me what signal level to expect from the PSK beacon on QO100 via Pluto and SDRC?

At the moment mine seems quite low at -112dBm or S2 but listening via the batc Goonhilly sdr it is about s9+10db. I am using a 90cm dish and 0.1 lnb....

just a test
EXT_REF.jpg
can be deleted later
:D
greetz sigi

Hi

With the latest AD firmware (0.32) SDRC does not control the GPO pins on TX but with the F5OEO DATV firmware it is ok.

So, two questions:

Is there any reason not to use the F5OEO firmware?

Will SDRC drive the GPO pins on TX in the future on...

Hello,
is there a timepoint known when a CW Generator for transmitting is available ??

Or is an Alternative Solution known ?
tnx Information

73 es HNY 2021
herbert
dl4sdr

Hi,

I’d like to ask for the following additional feature / option :

But first a description about what I did:

I developed a small add-on board for the Pluto which delivers some pretty accurate 40Mhz to the Pluto (Tailor Winfield VCTCXO) – I...

Hi all
I would like to help me, how to place Adalm Pluto in windows 10 home.
Thanks

Hello all,
Pluto SDR Console V3.025 for QO-100. Audio is noisy and has a lot of distortion when monitoring audio (Monitor , RX in the Transmit pane) . It used to work fine .
Windows 10, I7 PC
Any ideas ?
73 jacques F6BKI

Hi

I am new to Pluto so this is probably due to something I have not understood.

The gain of the main receive screen and the gain of the geostationary beacon screens are different.

When I first start SDRC and want to lock onto the beacon it is...

Simon asked to post the issue here, I did already post it a few days ago in the Test Team forum.
Please post this problem in the Pluto forum if you haven't already done this, add a full logfile. From memory the maximum allowed value may be 49 but...